HamburgerMenu
hirist

Sasken Technologies - Senior Embedded/MCU Firmware Engineer

Sasken
8 - 16 Years
Bangalore

Posted on: 16/11/2026

Job Description

We are seeking a seasoned Senior Embedded / MCU Firmware Engineer with 10 - 15 years of deep hands-on experience in Embedded C/C++ and bare-metal/RTOS firmware development.

In this role, you will lead the design, development, and integration of low-level firmware and device drivers on NXP microcontrollers (MCUs).

You will play a critical role in hardware bring-up, real-time system architecture, and end-to-end hardware-software integration, collaborating closely with hardware design, validation, and systems engineering teams to deliver highly reliable, production-grade embedded products.

Roles & Responsibilities :

- Firmware Architecture & Development : Design, develop, and optimize robust, deterministic embedded firmware in C and C++ for NXP MCU platforms (e.g., i.MX RT, LPC, Kinetis, or S32K series).

- Low-Level Device Drivers : Architect and implement bare-metal and RTOS-compliant peripheral drivers from scratch or via vendor SDKs (MCUXpresso), including DMA, ADC/DAC, Timers, PWM, and Flash/EEPROM storage.

- Board Bring-Up & Hardware Integration : Lead initial hardware bring-up on custom PCBs, validate schematic/pin-mux configurations, debug boot sequences, and resolve complex hardware-software interaction issues.

- RTOS Design & Optimization : Design multi-threaded real-time applications using FreeRTOS, Zephyr, or ThreadX, managing task scheduling, inter-process communication (queues, semaphores, mutexes), stack usage, and interrupt latency.

- Communication Protocol Implementation : Develop and debug wired communication stacks and bus interfaces including CAN / CAN-FD, SPI, I2C, UART, and GPIO.

- System Debugging & Validation : Perform deep root-cause analysis of timing issues, race conditions, memory corruption, and hard faults using hardware debuggers (JTAG/SWD, Lauterbach, Segger J-Link) and lab instruments (oscilloscopes, logic analyzers, CAN protocol analyzers).

- Technical Mentorship & Code Quality : Conduct thorough design and code reviews, establish firmware coding standards (e.g., MISRA-C/C++), mentor junior engineers, and drive continuous improvement in build/CI and automated hardware-in-the-loop (HIL) testing.

Required Qualifications & Technical Skills :

- Experience : 8 - 16 years of hands-on experience in embedded systems firmware development for microcontroller-based products.

- Programming Languages : Expert-level proficiency in Embedded C and strong working command of Embedded C++ (modern C++14/17/20 for resource-constrained systems).

- Microcontroller Expertise : Extensive hands-on experience with NXP MCUs (ARM Cortex-M / Cortex-R architectures), register-level programming, memory maps, and vendor toolchains (MCUXpresso IDE/SDK, IAR, Keil, or GCC ARM).

- RTOS Mastery : Deep practical exposure to real-time operating systems - specifically FreeRTOS, Zephyr, or ThreadX - including kernel porting, BSP customization, and real-time deterministic tuning.

- Peripheral & Bus Interfaces : Strong command of standard embedded communication protocols and interfaces: CAN / CAN-FD, SPI, I2C, UART, and GPIO.

- Debugging & Lab Instrumentation : Proficiency with in-circuit debuggers (SWD/JTAG, Segger J-Link, Ozone) and lab equipment (digital storage oscilloscopes, logic analyzers, protocol analyzers).

Preferred Qualifications (Good to Have) :

- Experience with bootloader development, Over-The-Air (OTA) firmware updates, and cryptographic/secure boot implementations.

- Familiarity with safety and coding compliance standards such as MISRA-C/C++, ISO 26262, or IEC 61508.

- Exposure to low-power MCU modes, battery-operated system optimization, or wireless stacks (BLE/Wi-Fi/Sub-GHz)

info-icon

Did you find something suspicious?

Similar jobs that you might be interested in

Loading chat...